TYPICAL USES:
• Kitchen and bath installations (countertops, tubs, sinks, shower and bath panel joints)
• Extreme joint movement
• All-purpose for general contractors • Carpentry, cabinet assembly and installation
• General sealant and adhesive PRODUCT DESCRIPTION CSL 160 is a one-part, moisture curing, room-temperature vulcanizing (RTV), 100% silicone sealant. CSL160 is an all-purpose silicone sealant ideal for applications where high levels of protection, adhesion, elasticity and longevity are desired. CSL 160 cures to a strong silicone rubber that maintains long term durability and flexibility. Cured CSL160 rubber will not shrink, crack, crumble, bleed or dry out.
 
APPLICABLE STANDARDS:
• ASTM C920-11 Type S, Grade NS, Use NT, M, G, A, O and I specifications
• Federal Specifications TT-S-001543A and TT-S-00230C
• Can/CGSB-19, 13-M87 CSL 160 is EcoLogo Certified
 
COLORS CSL 160 is available in Clear, Translucent, and White for quick delivery; additional colors include Beige, Black, Bone, Aluminum, Almond, Dark Brown, Medium Brown, Grey, and Linen. Please contact CSL for custom color availability. SURFACE PREPARATION & CLEANLINESS All surfaces should be clean and dry and free of dust, dirt, and grease. Priming is normally not required for applications to non-porous surfaces. Applying a small trial bead and allowing 7 days for maximum adhesion to occur can easily test unprimed adhesion. If primer is required contact manufacturer. APPLICATION CSL 160 is ready-to-use and requires no mixing or additives. The cure mechanism begins as soon as the sealant comes in contact with air. At 25°C (77°F) and 50% relative humidity (RH), the sealant will “skin” within 10 minutes and fully cure in 24 hours (1/8” bead), reaching its maximum adhesion in 7 days. Higher humidity accelerates cure, and curing time is increased with the thickness of the sealant. In applications where partial or total confinement of sealant is prevalent, the time required
 
for proper cure is generally lengthened by the degree of confinement. Tooling, if necessary, should be done before “skinning” takes place. One 300 ml (10.2 fl. oz.) cartridge will seal about 120 linear feet of 3/16” x 3/16” concave bead. SAFETY PRECAUTIONS CSL 160 releases small amounts of acetic acid during cure. Adequate ventilation should be provided with the extensive use of this sealant. On direct contact, uncured sealant may irritate eyes. Flush well with water and call a physician. Avoid prolonged contact with skin. See Safety Data Sheet (SDS) available on this product. Uncured sealant may irritate eyes on direct contact. Flush well with water and call a physician. Avoid prolonged contact with skin. See the Safety Data Sheet available on this product. This product is intended for use only by professional applicators in accordance with the advice given in this document, the Safety Data Sheet (SDS) and the container(s), and should not be used without reference to the SDS that CSL Silicones Inc. has provided to its customers. KEEP OUT OF REACH OF CHILDREN. All work involving the application and use of this product should be performed in compliance with all relevant national, Health, Safety & Environmental standards & regulations. If in doubt regarding
 
for more information you can visit this: https://cslsilicones.com/en/products/sealants-adhesives
 
We placed in Vancouver , Canada and send it to you in any place that you are in our great country : Canada